products

Anti Surge Digital Vacuum Pressure Switch Good Frequent Impact Resistance

Basic Information
Place of Origin: CHINA
Brand Name: AMILA
Model Number: MP20
Minimum Order Quantity: Negotiatable
Price: Negotiatable
Packaging Details: Carton package/Wooden cases
Delivery Time: Negotiatable
Payment Terms: L/C, T/T
Supply Ability: Depending on the order quantity
Detail Information
Category: MP 20 NPN And MP 20 PNP Measuring Range: -1 Bar To 0 Bar
Material: Polycarbonate Case Vacuum Connection: NPT 1/8 "External Thread Or M5 Internal Thread
Operating Temperature: 0-50℃ Item: Digital Vacuum Pressure Electronic Switch
High Light:

electronic vacuum switch

,

vacuum control switch


Product Description

Digital Vacuum Pressure Electronic Switch MP 20 Polycarbonate Case

 

1. Introduction

    The digital vacuum pressure switch has two independent relay outputs, each output has a normally open normally closed signal, and the differential can be set independently. One key is cleared, three units are switched, and an independent backlash is set. The setting is simple and the operation is convenient. Strong anti-electromagnetic interference, anti-surge protection, anti-reverse protection and so on. Resistant to vibration, frequent impact, beautiful appearance and durable.

 

2. Application

  • Condition Monitoring for vacuum system
  • Optimize the working cycle, adjust the system loop, and improve the economic benefit of vacuum system
  • The square design is more suitable for board surface installation
  • For all automated handling areas

3. Design

  • Electronic vacuum switch, sturdy polycarbonate case
  • Vacuum connection is NPT 1/8 "external thread or M5 internal thread
  • Built-in LED to show internal state of switch
  • Small size, light weight

4. Advantage

  • Switching accuracy
  • It is easy to use and can meet various needs of users.
  • Upper and lower limit values can be displayed on the screen
  • Wide range of adaptation

5. Design Data

 

Anti Surge Digital Vacuum Pressure Switch Good Frequent Impact Resistance 0

Type Dimensions[mm]                    
B G1 G2 G3 H H1 L LG1 SW1 X1 Y1
MP20 30 NPT1/8''-M M5-F M3-F 21.5 36.5 30 8 12 20 20

 

6. Technical Data

Type MP 20
Measured medium Air, non-corrosive, non-flammable
Measuring range -1 bar to 0 bar
Max. overpressure 1.5MPa
Repeatability ±3%F.S1digit
Hysteresis Adjustable
Inputs/outputs 2
Switching capacity max. [mA] MAX80mA
Indication Orange(1 indicator)OUT1.
Display accuracy ±1%F.S. 1 digit (at ambient temperature:25 to 3 )
Display unit kPa,Mpa,kgf/cm2,bar,psi,inHg,mmHg
Measured-value display 3-color (red,green, orange) display (sampling rate:5 times/s,2 times/s,1 time/s)
Measurement medium connection R1/8",M5
Voltage 12to24V DC ±10%, the peak value of continuous wave is less than 10%.
Current consumption [mA] ≤ 40MA (without load)
Protection level IP IP40
Temperature effect ±3%F.S (in the temperature range of 0 ≤ 50 )
Operating temperature [°C ] 0-50
Weight [G] About 67 g (including 2-meter wire)

Vacuum Switches MP 20.pdf

Contact Details
Evelyn Zhang

Phone Number : 86-18012729370

WhatsApp : +8618012729370